How long can the heat dissipation silicone sheet be used?

Highly insulating thermally conductive insulating sheet

Application of thermal gel in electronic equipment with high performance and miniaturization

In modern society, the importance of electronic equipment has become more and more popular, and the good or bad heat dissipation will affect the stability of thermally conductive electronic equipment. Thermally conductive materials and heat dissipation accessories play an indispensable role in electronic equipment. The form of heat dissipation of electronic equipment There are many types. Natural heat dissipation is the main one, which relies heavily on thermally conductive materials and accessories. With the improvement and upgrade of the application performance of electronic equipment in various fields, the upgrade and progress in the field of thermally conductive materials are driven.

How does thermal resistance affect the thermal conductivity of materials?

Thermal conductive material is the name of a material used to fill the gap between the heat sink and the heating device to reduce the contact thermal resistance between them. The common heat dissipation component on the market is composed of the heat sink and the heating device. If the two are in direct contact, the two There are inevitably gaps that are difficult to observe with the naked eye. These gaps are filled with air, and the efficiency of heat conduction in the air is very low, much lower than that of solid materials, which leads to poor heat dissipation.

What thermal conductive material can be made thin and insulating?

It is well known that thermal conductive material is a material that solves the heat dissipation problem of machinery and equipment, and its main function is to fill the gap between the heat source and the radiator, remove the air between the gaps (air is a poor conductor of heat), reduce contact resistance, and increase heat. The efficiency of conduction can improve the heat dissipation effect.

Why is the applicability of thermal gel very strong?

Computer heating is a relatively common thing. The main reason is that the internal power consumption electronic components of the computer generate heat during operation. If the temperature is not controlled in time, people often say that the CPU, the graphics card, the motherboard, etc. are short circuit Causes equipment damage, so it is necessary to install a heat sink on the power consumption electronic components to conduct heat to the heat sink in a timely manner.

Why do some thermally conductive silicone sheets need adhesive treatment?

Every step in the world has its own value. Even if it is optimized later, it only exists because it can improve efficiency or reduce costs, not because it is useless at the beginning. When improving, you need to consider the significance of each step, either improve or delete.

Green and environmentally friendly

With the continuous consumption of fossil energy, environmentally friendly, green, and renewable new energy sources have also attracted people’s attention and pursuit. As the raw materials for the construction of machinery and equipment, high-polluting and high-loss raw materials and parts are not suitable for today The trend of social development, green and environmentally friendly raw materials have become the pursuit of enterprise factories.

What are the advantages of glass fiber reinforced thermal conductive silicone sheet?

Although equipment heating is a common phenomenon, if it is not controlled in time, it may cause the equipment to crash or even short-circuit and cause safety hazards due to excessive temperature. Therefore, solving the equipment heating problem is a problem that product design engineers must solve.

What are the disadvantages of the glass fiber reinforced thermal pad?

Everything is good and bad. No one can say that it is perfect. Even a saint is no exception. When people treat everything, they always start from the good side, while the shortcomings are in contact. Find.

What is the impact of the small breakdown voltage of the thermal pad?

With the development and progress of society, people’s environment has undergone earth-shaking changes. Like sailing boats that used wind power in the past, ships using fossil fuels are now used, and horse-drawn carriages like horse-drawn carriages can now be powered by pure electricity. Cars, like the previous use of carrier pigeons or human mail delivery, now only need to send emails through mobile phones or computers, it can be said that technology changes lives.

Why are thermal phase change films more and more popular?

There are many raw materials in the world, and every high-precision instrument is composed of these seemingly insignificant raw materials, which are indispensable. With the passage of time and the advancement of science and technology, equipment and instruments are gradually moving in the direction of lightness and multi-function. , So the raw materials should also change over time, no longer a single role before.

What impact will the thermal resistance of the heat sink silicone sheet increase?

There are many things in the world. Some people can observe with the naked eye, some have to be observed with scientific instruments, and even some things still cannot be verified by science, so some people say that sometimes we see things that are not real. But we have to believe that science answers all things in the world for people.

What is the thermal resistance of the thermal silica film?

Raw materials are necessary substrates for products, and most of the factors that affect product performance are raw materials. Therefore, product design, production and sales need to fully understand the characteristics of raw materials and which aspects will affect their performance. Give full play to the true performance of the product.

Why are there bubbles on the surface of the thermal pad?

Perfection and defects coexist in the world. Nothing is perfect, and nothing is worthless or worthless. As the saying goes: The lack of a great road means that everything in the world has its own defects, even the heavens. It is the same, but for the raw material, the defect is an error, but if it exceeds the specified range, it means failure.